FROMM A301 A412 Manual Steel Strapping Tool

Manual tensioner A301 is specially designed for flat objects and packages. Thanks to the feed wheel tensioning system an unlimited band take-up is permitted, guaranteeing taut tension with no tension loss. Using manual sealer model A412 the double notch joint is produced in one operation. The ideally curved levers prevent the handle from jamming, guaranteeing rational working with no risk of a hand injury.

SITCO authorized distributor of FROMM Packaging Tools, offering a wide range of manual steel strapping tools in Bahrain, Saudi Arabia, Oman, and Egypt. The FROMM A412 Manual Steel Strapping Sealer is to be used after the steel strapping has been tensioned. Simply apply your seal to the tensioned strap and clamp.

Sealing tool A412 is used in combination with the manual flat or round tensioners A301/A402. The double notch joint is mounted in a single operation permitting only perfect notch joints thanks to the built-in safety pawl. The ideally curved levers prevent the handle from jamming, guaranteeing rational working with no risk of hand injury. The rubber spacer on the lower lever also permits sealing with both hands on the upper lever.

• The tool has been designed for flat packages and objects
• The feed-wheel tensioning system allows unlimited strap take-up
• Tight strap tension without any tension loss
• The long tensioning handle permits high and effortless strap tension
• The strap guide prevents the strap from getting out of line during tensioning

• The safe upcut double notch joint is accomplished in one stroke
• The installed safety catch guarantees perfect seal joints only
• The specially shaped sealing handle (bent) assures an accident free operation (a crushing of the hands is not possible)
• The distance rubber roll on the lower handle places the handle into the correct position relative to the seal and allows the sealing action to be accomplished with both hands